Habib Benabdallah

M.
Habib Benabdallah
B.Ing., M.Sc.A., Ph.D., P.Eng., Professeur Agrégé
Bureau:
ÉS3118
Téléphone:
(613) 541-6000 poste 6382
Télécopieur:
(613) 542-8612
Courriel:
Département de Génie mécanique et aérospatial

Adresse du collège

Collège militaire royal du Canada
CP 17000, Succursale Forces
Kingston (Ontario) CANADA
K7K 7B4

Sommaire de la carrière

  • M.Sc.A. (génie chimique) - École Polytechnique de Montréal (1983)
  • Ph.D. (génie mécanique) - École Polytechnique de Montréal (1987)

Spécialisations et intérêts

Tribologie

Mes intérêts de recherche sont principalement le frottement et l'usure des matériaux avancés, plus spécifiquement les sujets suivants :

  • Analyse des mécanismes de frottement et d'usure dans le cas du contact en mouvement relatif.
  • Comportement en frottement et usure des matériaux plastiques et céramiques à haute performance.
  • Pièces coulissantes avec surface de frottement munie d'un recouvrement.
  • Modélisation de l'usure par la méthode des éléments finis.
  • Mesure de la surface réelle de contact.
  • Phénomène de fatigue produit par la variation des contraintes de contact lors de mouvement de va-et-vient.
  • Émissions acoustiques émanant de la région de contact entre deux surfaces en mouvement relatif et leurs relation avec le phénomène de frottement.
  • Frottement statique, mesure et modélisation.
  • Lubrifiants solides avec une certaine concentration de contaminant.
  • Simulation du phénomène de frottement qui se produit lors du contact de l'extrémité d'un robot et une surface de contact quelconque.

Mon laboratoire contient différents équipements modernes de recherche en tribologie (tribomètres) munis de senseurs de mesure sophistiqués permettant des mesures précises en temps réel du frottement de l'usure, de la température de contact et des émissions acoustiques. Les mouvements en va-et-vient et continus peuvent être simulés pour le cas de plusieurs géométries de contact sous environnement contrôlé de température, humidité et lubrification.

Réciprocateur

Tribometer

Robot à deux dimensions

Indentation à très faible profondeur des matériaux

Étude de l'effet de la température, vitesse d'indentation et géométrie de l'indenteur aigu sur la résistance à l'indentation superficielle des matériaux plastiques.

Cours enseignés actuels et récents

Cours enseignés - CMR :

  • GM549 Tribologie
  • GA537 Structures des aéronefs et matériaux
  • GMF431 Analyse des contraintes
  • GMF331 Résistance des matériaux
  • GMF333 Métallurgie et matériaux
  • GMF301 Éléments des machines
  • GMF303 Principes du design en ingénierie

Cours enseignés - Queen's University (Kingston Ontario) :

  • CIVL 220 Statics and Solid Mechanics
  • MECH 321 Solid Mechanics II

Cours enseignés - École Polytechnique de Montréal (Montréal Quebec) :

  • ING1040 Introduction au génie et aux projets d'ingénierie
  • 2.322 Méthodologie du design
  • 2.338 Matières plastiques
  • 2.462 Projet de design avec l'industrie I

Publications

Articles publiés dans des revues avec arbitrage

  • H.S. Benabdallah et D. Aguilar, « Acoustic Emissions for Dry and Grease Lubricated Steel Sliding Contacts and its Relationship with Friction and Wear », Tribology Transactions, 51, p. 738-747, 2008.
  • H.S. Benabdallah, « Friction Wear and Acoustic Emissions of some Plastics Sliding against Si3N4 », Wear, 264, p. 152-156, 2008.
  • H.S. Benabdallah, «  Static Friction Coefficient Of Some Plastics Against Steel and Aluminum Under Different Conditions », Tribology International, Volume 40, Issue 1, p. 64-73, 2007.
  • H.S Benabdallah,«  Tribological Behaviour and Acoustic Emissions of Some Thermoplastics Sliding Against Steel », Transactions of the ASME, Journal of Tribology, 128, p. 96-103, 2006.
  • H.S. Benabdallah et D. Olender,«  Finite Element Simulation Of The Wear Of Polyoxymethylene In Pin-On-Disc Configuration », Wear, 261, p. 1213-1224, 2006.
  • E. Eder, V. Hubka et H. Benabdallah, « Educating for Engineering Design using Design Science », Journal of Design Engineering and Innovation, 01E1, p. 9-18, 2005.
  • H.S. Benabdallah et J. Wei,«  Effects of Lubricants on the Friction and Wear Properties of PTFE and POM », Transactions of the ASME, Journal of Tribology, 127, p. 766-775, 2005.
  • H. Benabdallah et V.T. BUI, « Indentation of Poly(formaldehyde) Reinforced Nylons and Poly(ethyl terephthalate) », Polymer Engineering & Science, 44, 8, p. 1439-1447, 2004.
  • H. Benabdallah, « Friction and Wear of Blended Polyoxymethylene Sliding against Coated Steel Plates », Wear, 254, p.1239-1246, 2003.
  • H. Benabdallah et R.J. Boness,«  Tribological Behaviour and Acoustic Emissions of Alumina, Silicon Nitride and SAE52100 under Dry Sliding », Journal Of Materials Science, 34, p. 1-10, 1999.
  • H. Benabdallah et I.E. Boros, « FEM Analysis of Axisymetric Indentation of Layer Bonded to a Rigid Foundation », Transactions Of The Canadian Society For Mechanical Engineering, 4A Vol. 22, p. 379-396, 1998.
  • H. Benabdallah,«  Reciprocating Sliding Friction and Contact Stress of some Thermoplastics against Steel », Journal Of Materials Science, 32, p. 5069-5083, 1997.
  • H. Benabdallah et I.E Boros,«  Finite Element Analysis of the Indentation of Thick Coatings by Cylindrical Indenter », Transactions Of The Canadian Society For Mechanical Engineering, 20 Vol. 3, p. 217-232, 1996.
  • H. Benabdallah, « Small Depth Indentation of UHMW (Polyethylene) », Transactions Of The Canadian Society For Mechanical Engineering, 19 Vol. 3, p.247-259, 1995.
  • H. Benabdallah et J.P. Chalifoux, « Small Depth Indentation of Plastic Materials », Polymer Testing, 13, p.377-393, 1994.
  • H. Benabdallah,«  Static Shear Strength and Adhesion Friction of some Thermoplastics », Polymer Engineering & Science, 9 Vol. 33, p.543-548, 1993.
  • H. Benabdallah, « Shear Strength resulting from Static Friction of some Thermoplastics », Journal Of Materials Science, 28, p.3149-3154, 1993.
  • H. Benabdallah,«  The Running-In and Steady State Coefficient of Friction of some Engineering Thermoplastics », Polymer Engineering & Science, 2 Vol. 33, p.70-74, 1993.
  • H. Yelle, H. Benabdallah et H. Richards, « Friction and Wear of Polyethylene-Nylon blends », Wear, 149, p.341-352, 1991.
  • H. Benabdallah et H. Yelle,«  Static and Quasi-Dynamic coefficient of Friction of Three Engineering Thermoplastics », Journal Of Materials Science, 26, p.2445-2450, 1991.
  • H. Benabdallah et J.P. Chalifoux, « Computer Aided Friction Tester », Tribology International, 6 Vol. 24, p.403-408, 1991.
  • H. Benabdallah et J. Lapierre, « A New Device for Measuring the Real Area of Contact of Polymeric Material », Journal Of Materials Science, 25, p.3497-3500, 1990.
  • H. Benabdallah,«  Reciprocating Sliding Friction and Wear Test Apparatus », Polymer Testing, 9, p.195-211, 1990.
  • H. Benabdallah et J.P. Chalifoux,«  Ploughing of Soft Asperities by a Hemispherical Slider », Tribology International, 6 Vol. 22, p.383-388, 1989.

Compte-rendus de conférences

  • H. Benabdallah, « Triblogical behaviour and Acoustic Emissions of some Plastics Sliding against SI3N4 », Proceedings of the 16th International Conference on Wear of Materials, Montréal, QC, 15-19 Avril, 2007.
  • H. Benabdallah et D. Olender,«  Finite Element Simulation of Wear in Pin-On-Disc Configuration », Proceedings of the ASME conference IMECE, Orlando, Florida, 5-11 novembre, 2005.
  • H. Benabdallah,«  Effects of Lubricants on Friction and Wear of PTFE and POM », Proceedings of the STLE/ASME joint conference, Long Beach, CA, p.204-209, 24-27 octobre, 2004.
  • E. Eder, V. Hubka et H. Benabdallah, « Educating for Engineering Design using Design Science », Proceedings of the Inaugural CDEN Design Conference, Montréal, QC, Juillet 29-30 , 2004.
  • H. Benabdallah, « Static Friction Coefficient of some Polymer Composites », Proceedings of the STLE Annual Meeting, Toronto, ON, p. 56-68, 17-20 mai, 2004.
  • H. Benabdallah,«  Tribological Behaviour and Acoustic Emissions of Some Thermoplastics Sliding Against Steel », Proceedings of the STLE/ASME joint conference, Ponte Vedra, FL, p.1-9, 26-29 octobre , 2003.
  • H. Benabdallah,«  Indentation of some Plastic Materials by Indenters of Different Shapes », 60th Technical Conference, Society of Plastics Engineers, San Francisco, CA, p.1581-1586, mai 5-9, 2002.
  • H. Benabdallah et I.E. Boros,«  A Finite Element Analysis of the Indentation of Thick Coatings by Spherical and Cylindrical Indenters », 1 st Canadian Conference on Non-linear Solid Mechanics, Victoria, British Columbia, p.455-466, 16-20 juin , 1999.
  • H. Benabdallah, V.T. Bui, H. Morrison et C. Manuel, «  Indentation of Commercially Available Thermoplastics », 48th Canadian Chemical Engineering Conference , London, Ontario, 4-7 octobre , 1998.
  • H. Benabdallah,«  Reciprocating Sliding Friction and Contact Stresses of some Thermoplastics Against Steel », 54th Technical Conference, Society of Plastics Engineers , Indianapolis, IN, p.2349-2354, 5-10 mai , 1996.
Date de modification